How to Remove a Laptop Screw

Publish time: 17 Jun 22

When a laptop screw is stuck in a part of the laptop, you may be tempted to drill out the whole screw to remove it. However, drilling out the screw can permanently damage the threads. Because laptop screws are small, you will need to use a drill bit that is slightly smaller than the size of the screw. Make sure that you drill a shallow impression into the screw head using a metal drill bit. If this doesn't work, try the rubber band method.

Screwdrivers

If you're looking for the best screwdrivers for laptop repairs, look no further than the iFixIt line of screwdrivers. This kit comes complete with everything you need to repair your laptop. It also includes a case that's suitable for storing your tools. You can even save your case so that it matches your other iFixIt screwdrivers.

Wafer head machine screws

If you're replacing the screws in your laptop, you can use the right types of machine screws. These screws are also called wafer head machine screws. They have a diameter of five millimeters and are made of steel. They are available in different colors, including silver or nickel-plated. Depending on the model, they come with a metric or Phillips head thread and are sold in case quantities from three to ten thousand.

Jack Screw Standoffs

If your laptop motherboard is attached to the case with a jack screw, you'll have to adjust the standoff to ensure that the case is properly aligned. Most standoffs are made of plastic, but they can also be found in stationary computers. These plastic standoffs are less secure than metal ones, but they are equally useful for ensuring that your laptop's motherboard has adequate margin space. In addition, you can use standoffs to prevent short circuits from occurring.

M3 screw

There are two kinds of screws used in computers: metric and imperial. Both are the same size, but differ in the threading pattern. If you use an M3 screw in a 6-32 hole, it will not stay in place and will eventually strip. You can also find self-tapping plastic screws that fit into holes sized for other screws. These screws can be used in stationary computers as well. It is important to use the correct type of screw for your specific model.